Invitrona — Electrical Power Systems

OEM & product integration

Define the power supply or LED driver your product needs, from electrical output and mechanical fit to validation and production requirements.

Discuss this application
Rendered illustration of an electronics assembly bench with an equipment chassis containing an enclosed power supply, an LED driver and a circuit board in a tray.

Equipment to explore

These product classes are a starting point, not a final selection for your project.

Rendered illustration of an open steel control enclosure for a servo voltage stabilizer, with a controller card carrying relays and terminal blocks above a DIN rail of contactors, circuit breakers and wiring in trunking.
Voltage regulation

Servo Controllers

Control cards that sense voltage and drive the servo motor in a stabilizer.

For stabilizers up to 500 kVASingle or three phase
View product
Rendered illustration of a sealed LED driver in a ribbed dark grey aluminium case with cable leads at each end, on a workbench beside a street-light luminaire housing.
Power electronics

LED Drivers

Constant-current and constant-voltage LED drivers, typically 10–200 W.

Typically 10–200 WConstant current or constant voltage
View product

What we’ll work through together

Consistent power, engineered into your product

  • What electrical, mechanical, thermal, environmental, and interface requirements form the baseline
  • Who owns product-level validation, certification, integration, and intellectual property
  • How prototype, approval, production release, traceability, and change notification will work
  • Which forecast, continuity, quality, and field-support expectations are commercially viable

Bring what you know.

You don’t need every detail to start. Share the project information available to you.

  • Controlled technical and interface requirements
  • Validation plan, acceptance criteria, and approval ownership
  • Expected programme volumes, timing, production process, and traceability needs
  • Change-control, continuity, field-quality, and commercial assumptions

Application notes

The technical conditions and design principles behind this setting.

Start with your project.

Tell us what you’re working on. We’ll start with your application, load and installation needs.

Discuss your requirement Request service support

By post

A-56, Naraina Industrial Area, Phase 1
New Delhi 110028, India